Locke Posted January 12, 2006 Share Posted January 12, 2006 Yesterday I tried a couple of 3200C2 TwinX (2x512MB) memory modules (XMS3202v5.2) with a new Asus A8N-SLI premium mobo. The problem is, the system doesn´t POST (and doesn´t give any bios beep, either with one or the two modules :(: ). Trying with a 512MB stock memory stick from another computer, the system POST perfectly. Is there any compatibility issue with this memory+mobo? if not, what should I try? is the RAM defective? Thanks! ;): Link to comment Share on other sites More sharing options...
Wired Posted January 13, 2006 Share Posted January 13, 2006 Test one stick at a time in each slot using Memtest86+ and the following timings: CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
Locke Posted January 13, 2006 Author Share Posted January 13, 2006 I found a workaround for this problem and posted it in this thread :roll: : http://www.houseofhelp.com/forums/showthread.php?t=42760 Link to comment Share on other sites More sharing options...
ScramDog Posted January 13, 2006 Share Posted January 13, 2006 See my post in the same thread... See if you can set the DRAM settings. I can't even get into my BIOS setup so I'm waiting to hear back from ASUS... :[pouts: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 14, 2006 Corsair Employees Share Posted January 14, 2006 I think I have answered you in the other thread. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.