irev210 Posted January 11, 2006 Share Posted January 11, 2006 The memory used to work fine, now one stick will not even light up. The other stick is fine. I would like to RMA this ASAP so i can have dual channel memory again. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 12, 2006 Corsair Employees Share Posted January 12, 2006 Please set the Dim Voltage to 2.8 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.