chocoruacal Posted January 9, 2006 Share Posted January 9, 2006 VS2GBKIT400C3 Fails Memtest86 at 3-3-3-8 and 400mhz DDR. Link to comment Share on other sites More sharing options...
chocoruacal Posted January 10, 2006 Author Share Posted January 10, 2006 Please respond so that I can start the RMA process. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 10, 2006 Corsair Employees Share Posted January 10, 2006 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.