bigjimbo157 Posted January 9, 2006 Share Posted January 9, 2006 I just recently purchased a set of 2 sticks of vs1gb400c3 to upgrade my system. At first, my comp spontaneously rebooted after about a few minutes. So, I placed the 2 sticks in different slots until the system was stable enough. I think the slots were slot 2 and 3 according to cpu-z. Now, the only problem I get is basically when I play WOW, in which I get random general errors. I have checked the compatibility page, which led me to believe that the ram wasn't compatible w/ my mobo. Then, I checked these forums, which led me to believe that they were compatible. http://www.houseofhelp.com/forums/showthread.php?t=26654&highlight=a7n8x+deluxe+vs1gb400c3 If the ram is really compatible with my board, then what would be the best voltage and timing settings? If they aren't compatible, I would like to know asap. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 11, 2006 Corsair Employees Share Posted January 11, 2006 Please try these settings after you load setup defaults. CPU Freq: 166 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.7 Volts (If you Over Clock set to "2.8 Volts") Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T (If you Over Clock set to "3") SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 7T Then test your system with http://www.memtest.org. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.