Kryptic3D Posted January 7, 2006 Share Posted January 7, 2006 Hi All, Just built a new system, and everything appears to be running ok. Only concern, is that when I run memtest, it says my memory timings are 3-3-3-8. Shouldn't these memory sticks be automatically detected to run at 2-3-3-6 ? Should I set them manually? If so, can I have a list of settings to use in bios? System specs: AMD Athlon 64 3200+ (939 Winchester) Asus A8V Motherboard (Rev 2.00) Corsair TWINX1024-3200C2PT nVidia 6600GT AGP Link to comment Share on other sites More sharing options...
Wired Posted January 7, 2006 Share Posted January 7, 2006 CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.