spirefm Posted January 6, 2006 Share Posted January 6, 2006 I upgraded my motherboard to 2GB dual channel (from 1GB dual channel with KVR) with Corsair Value Select after using the configurator but have been completely unable to get it to run reliably at any clock speed using the recommended voltage and CAS settings. I had absolutely no problems whatsoever with the Kingston 1GB dual channel and could overclock by 10% too. 2 different ABIT forum guys say that VS is simply not compatible with the AV8Can I return these modules and upgrade to something better? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 6, 2006 Corsair Employees Share Posted January 6, 2006 Are you trying to mix our modules with your other memory? If so please just install our modules and load optimized defaults and set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.