Jump to content
Corsair Community

Twinx1024-4400C25 problem?


Recommended Posts

I have a DFI LAN PARTY ULtra-D Nforce 4 with an AMD Athlon 64 X2 3800+ & i have the lastest bios for the mobo. The sticks are in the orange slots working in dual channel.

I can't succeed to not have BSOD at more than 240 Mhz @ 2.8v @ 3-4-4-8 (and more relax timings). And when i test @ 200 with prime95, i have errors too. Guys suggest me to increase the voltage but i have read that Corsair modules are Samsung TCCD, and these modules are recommended for 2.9v MAX, so i haven't tried.


I know that my CPU and my mobo can go more than 280 Mhz (because a friend test the CPU for me, and i test the mobo with à A64 3500+ with ram @ 166 mhz)


I have tested them too on ASUS P4C800-E (I875) with an P4C 3.0Ghz 30 caps (which is working @ 3.80 Mhz @ 1.5v with an other brand of memory) and i have the same problems : Corsair modules can't work without BSOD & I have never succeed to test corsair modules @ 275 Mhz !


So please help a french lost guy.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...