Computer-Ed Posted January 2, 2006 Share Posted January 2, 2006 Okay I have been experiencing a number of Blue screens, I have an Abit KN8. Their forums are suggesting that these issues are ;likely a meory timing issue. I am running a Corsair Value Select 1 Gig (2x512) pack with a rated speed of 2.5 Now then below are the various settings I can effect: DRAM Configuration - DRAM Clock - CAS Latency Time - Row Cycle Time Row Refresh Cycle Time RAS# to CAS# Delay - RAS# to RAS# Delay Min. RAS# Active Time - RAS Precharge Time - Write Recovery Time Write to Read Delay Read to Write Delay DRAM Command Rate - Burst Length Bank Interleaving 32 bit DRAM Memory Hole MTRR Mapping Mode What are the correct settings for these with my RAM. The rest of the system is an Athlon X2 4600+ and an ATI AiW X1800XL. Will upgrade the RAM a bit later.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.