Help with Cool install

[condez]

What is the best way to install the

the following blocks:

Corsair cpu block

" 2 GPU Water Block SLI

" North Bridge Water Block

 

Is this setup even possible without

negative cooling effects?

Do I need to modify the "Cool" system?

thanks for the help

[KaptCrunch]

using 2 3/8" "Y"'s with the same GPU blocks, split them with "Y"'s with loop

pump>CPU>"Y"-2 GPU-"Y">NB>Rad>Rez, using a 3/8 NB WB, for the extra heat have push pull air on the RAD (a fan on both sides of rad)

[stev]

condez,

 

KC's format would work if the CPU cold-block is the STORM.

 

If your CPU is NOT hot, then you could do this:

 

................................../-> GPU 1 -> Chipset NB -> \

Reservoir -> Pump -> "Y"........................................-> "Y" -> HX -> Reservoir

..................................\-> CPU -> GPU 2 -> ........../

 

Depending on the tube routing, you could swap the GPU 1 & 2 around to fit things in this loop.

 

If you have a HOT CPU, then this could be the answer:

 

................................../-> GPU 1 -> GPU 2 -> ....\

Reservoir -> Pump -> "Y"......................................-> "Y" -> HX -> Reservoir

..................................\-> Chipset NB -> CPU -> /

 

Remember to measure twice and cut once. ;)

 

Stev