Zurich Posted December 19, 2005 Share Posted December 19, 2005 Hi, I just can not get 2336@400mhz. memtest shows 2.5-3-3-8 whatever I set volt from 2.5v to 2.8v PC wizard shows 2-3-3-6 @166mhz witch is 322mhz, 2.5-3-3-8 @200mhz witch is 400mhz. CPU at 2601mhz 400mhz Can any one advise how to set bios to get 2336? Thanks:confused: Link to comment Share on other sites More sharing options...
Wired Posted December 20, 2005 Share Posted December 20, 2005 Go into the BIOS and change these settings: CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
Zurich Posted December 20, 2005 Author Share Posted December 20, 2005 found ways, thanks.:): Link to comment Share on other sites More sharing options...
Zurich Posted January 12, 2006 Author Share Posted January 12, 2006 Dear Wired: IC7 only has 2.7v or 2.8v setting, so I guess 2.7v is ok ar? :): Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.