Philur Posted December 15, 2005 Share Posted December 15, 2005 I just bought a new memory module (VS512MB400) and I can not get it to work properly. I have: EpoX EP-8KDA3J with AMD Athlon 64 3200+ 2.2GHz. (BIOS rev 01 Apr 2005) 2x CVS PC3200 DDR-DIMM 512MB (VS512MB400) in slot 0 & 2 I installed the new 512MB module and put it in slot 1. During boot up I can see that I have 1.5GB installed but when my OS (XP) starts to load it hangs. Do I have to do something in the BIOS? Or have I just messed up and bought the wrong memory? Help please! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 15, 2005 Corsair Employees Share Posted December 15, 2005 With three modules you may need to set the memroy frequency to DDR333 and I would set the memory voltage to 2.8 Volts at Cas 2.5-3-3-7 as well then use http://www.memtest.org to test the system. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.