BobD Posted December 12, 2005 Share Posted December 12, 2005 Built new PC with Abit AN8-SLI mb and two VS1GB400C3 memory sticks. Either stick passes memory testing alone, but can't get the two to work a once. System runs but is flakey, and memory test fails. Tried increasing DDR voltage to 2.7 from 2.6 Tried decreasing Dram speed from DDR400 to DDR333 But no luck in any configuration (1&2, 3&4, 1&3) Any ideas?? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 13, 2005 Corsair Employees Share Posted December 13, 2005 That might suggest some other problem. Can you test them in another system? Link to comment Share on other sites More sharing options...
BobD Posted December 14, 2005 Author Share Posted December 14, 2005 Unfortunately, not for a week or two at the earliest System continues to run fine with only one stick Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 14, 2005 Corsair Employees Share Posted December 14, 2005 I would try another PSU if you can just to test based on what you have posted. But I have no problem replacing the modules if you want to try that. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.