mulhbacher Posted December 12, 2005 Share Posted December 12, 2005 I have a Shuttle XPC with a VS512MB400C in it. I just purchased a new stick VS1GB400C3. With either stick, PC boots fine. When both sticks are installed, PC won't boot. It does not even get to the memory test or show any POST info. Any help will be greatly appreciated. THX :(: Link to comment Share on other sites More sharing options...
Yellowbeard Posted December 12, 2005 Share Posted December 12, 2005 Can you please list the complete specifications on your Shuttle? Also, mixing different revisions of RAM is usually not a good idea as you may get an unstable system or not be able to boot. Also, will your Shuttle allow you to disable SPD for the memory? If so, disable it using 1 of the DIMMs, then power down, install the 2nd DIMM, and see if it will boot. If this does not work, we will need your system info to make more suggestions. Mike. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.