schembo2000 Posted December 7, 2005 Share Posted December 7, 2005 I have a value select ddr2 1gb memory kit that tested bad in memtest. This was on an Intel 915PBL board with all settings set for auto. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 7, 2005 Corsair Employees Share Posted December 7, 2005 Please set the Dim Voltage to 1.9X volts and then set the timings manually to "BY SPD", and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.