rglr Posted November 28, 2005 Share Posted November 28, 2005 I believe I have a bad module. I was experiencing intermittent booting problems where the power and hd led's would light but no video display or booting. I had to power the pc on and off a few times to get it to eventually boot. Now it never boots. I have bought new motherboard, cpu and video card and still cannot boot with this memory module. Link to comment Share on other sites More sharing options...
risk_reversal Posted November 28, 2005 Share Posted November 28, 2005 Have you run memtest to confirm that your ram is faulty. There is a link on this site or just google for it memtest86+. The latest version is 1.6 I beleive. Run memtest for at least 12hrs with both sticks of ram to see if any error(s) are found. If there are error(s), then run one stick at a time to isolate which ram stick is faulty. Good luck Link to comment Share on other sites More sharing options...
Wired Posted November 29, 2005 Share Posted November 29, 2005 What CPU / FSB / Motherboard do you have? What is the exact part # and revision # of each stick? Is it a TwinX pack? How To Read the Memory Label If you have more than one stick, have you tested one stick at a time in each slot using Memtest86+? Click here to find out how you can add your system specs to your profile and posts! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 29, 2005 Corsair Employees Share Posted November 29, 2005 RGLR, any updates? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.