bwtippit Posted November 21, 2005 Share Posted November 21, 2005 No OC!! It boots and runs under basic windows. When I run memtest it comes back with errors as configured below. 1) Dual Channel in either set of slots 31 errors on test 5,7 and 8 2) Single Channel in any of the other slots about the same as above. 3) Run a one SDRAM in any slot 7 errors on test 5 and 7 4) Run the other SDRAM same as above get 13 errors on test 5 and 7 I've ran it with many times some of them I've listed below all auto 3 3 3 8 1T The forums here said 2.5 3 3 6 1T Many other timing under 1T and 2T. All around v2.75 When I run prime95 it will not pass in any configuration. I ran these chips on another computer and still didn't pass (it did pass with its own DDR2 chips though) In any 3D game after a few minutes it freezes the computer. I do not have othe RAM to test in this computer. Does this sound like I got some bad RAM or could it be MB? Also If it is bad should I change to a different Corsair RAM? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 21, 2005 Corsair Employees Share Posted November 21, 2005 Let's go ahead and replace these modules for you. Please see the link in my signature "I think I have a bad part, what do I do?". As for changing the part, you will have to speak to our Customer Service department about that. Note any questions you have in your RMA form. Link to comment Share on other sites More sharing options...
bwtippit Posted November 21, 2005 Author Share Posted November 21, 2005 Ok I have a RMA ready to go from Newegg. I'll be sending these out tomorrow. Thanks for the help Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 22, 2005 Corsair Employees Share Posted November 22, 2005 Thank you, let us know if you have any further questions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.