silent assassin Posted November 19, 2005 Share Posted November 19, 2005 Hi, I have buyed a CMX512-3200C2PT, I have errors on memtest, also I have tested the module into another system and I get the same errors. I think this module is bad. My config is: MB:P4P800-x CPU P4 3.0 northwood Video card: ATI 9800 PRO Audio Card: Sound Blaster Audigy 2 ZS Link to comment Share on other sites More sharing options...
Wired Posted November 19, 2005 Share Posted November 19, 2005 What settings did you test it at? Here's the correct settings to compare to: CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts All other settings to defaults. Testing 1 stick at a time of course. Link to comment Share on other sites More sharing options...
silent assassin Posted November 20, 2005 Author Share Posted November 20, 2005 I have tested ram at this setting on three mainboard Abit an8, Asus A7v8x ram works correctly Asus a7n8x-e delux ram reports errors A strange thing noticed on my system is that memtest stops to report errors after 15 minutes of cycling then the system is ok. If I remove power cable from the pc I must wait 15 minutes until the system become stable. Any suggestion ? Link to comment Share on other sites More sharing options...
Wired Posted November 20, 2005 Share Posted November 20, 2005 Update the BIOS to the latest version, use slots 1 and 3 I believe. Link to comment Share on other sites More sharing options...
silent assassin Posted November 20, 2005 Author Share Posted November 20, 2005 I have re-checked the ram I report more than 1000 errors on each mainboard used for testing. This ram won''t work in all maiboards that I have used for testing. I think at this point that the ram is defective and that is not a compatibility problem.... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 22, 2005 Corsair Employees Share Posted November 22, 2005 Please click on the "I think I have a bad part..." link in my signature and follow the directions. We would be more than happy to replace these modules for you. Link to comment Share on other sites More sharing options...
silent assassin Posted December 5, 2005 Author Share Posted December 5, 2005 I have sent you the ram stick but for the momemt i have not received the ram back. What is the state of the rma ? Link to comment Share on other sites More sharing options...
Wired Posted December 6, 2005 Share Posted December 6, 2005 What's your RMA #? May also want to call them: 1-888-222-4346. Link to comment Share on other sites More sharing options...
silent assassin Posted December 6, 2005 Author Share Posted December 6, 2005 My rma number is R100660 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 8, 2005 Corsair Employees Share Posted December 8, 2005 Your RMA was processed today, so you should get the new module in about 3 days. Link to comment Share on other sites More sharing options...
silent assassin Posted December 8, 2005 Author Share Posted December 8, 2005 Thanks, I have also changed my mainboard, now is p4p800e deluxe, I will let you now if there are problems. What are the correct settings for this mainboard ? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 8, 2005 Corsair Employees Share Posted December 8, 2005 Wired had given the correct settings previously. CAS Latency (tCL): 2 RAS to CAS Delay (tRCD): 3 Row Precharge (tRP): 3 Active to Precharge Delay (tRAS): 6 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
silent assassin Posted December 13, 2005 Author Share Posted December 13, 2005 Is there a tracking number for the replacement module ? I have not received yet the module. I'am from Italy. Sorry for my bad english. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 14, 2005 Corsair Employees Share Posted December 14, 2005 Please email that request to rma@corairmemory.com along with your RMA number. They will do their best to help you. Link to comment Share on other sites More sharing options...
silent assassin Posted December 18, 2005 Author Share Posted December 18, 2005 I have received the ram and for the moment the stick seems to work correctly at the settings given by wired. I will let you know if there are any problems. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 19, 2005 Corsair Employees Share Posted December 19, 2005 O.K. Great and thank you for letting us know! Link to comment Share on other sites More sharing options...
silent assassin Posted December 27, 2005 Author Share Posted December 27, 2005 The rams works greatly. Thanks corsair. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 27, 2005 Corsair Employees Share Posted December 27, 2005 Great and thank you for letting me know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.