Jump to content
Corsair Community

XMS3200 will not boot


Recommended Posts

with my other stick it will boot just fine if it is in slot 0. but this one I pulled out, it will not boot with it in slot 0 at all. it will boot if it's in a different slot and the good one is in slot 0. but as soon as it tries to write to it I get a blue screen and it just dumps on me.
Link to comment
Share on other sites

  • Corsair Employees

To properly figure out if the problem is the memory or not, you should run memtest and inform me of the results. Put the memory in a known working slot ONE AT A TIME.


Here are the directions you can use to run memtest:


1. Head over to http://www.memtest.org

2. Click on the link labeled "Download (Pre-built & ISOs)"

3. Next click on the link labeled "Download - Pre-Compiled package for Floppy (DOS - Win)"

4. Download the software and Unzip the program files

5. Make sure a floppy disk is inserted

6. Run the program, when it asks which drive letter type in "a:"

7. Program should finish writing, reboot off floppy disk

8. Allow memtest to run 2-3 passes


I hope these instructions help you! Please let me know what happens!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...