Fyzwick Posted November 18, 2005 Share Posted November 18, 2005 Seemed to have developed a bad stick from a pair of VS512MB400. Used memtest86 to test both sticks simultaneously and found an error, so I tested one stick seperate(haven't tested the 2nd stick yet). BIOS RAM settings are all set to auto. Here is the Memtest86 v3.1 report(on the single stick test) Test 4 Pass 14 Failing Address: 00002333de4 - 35.1MB Good 00000080 Bad 00000000 Err-Bits 00000080 Count 1 Motherboard is a Soltek Nforce3 250 board CPU Athlon 3000+ Sempron Link to comment Share on other sites More sharing options...
Fyzwick Posted November 19, 2005 Author Share Posted November 19, 2005 I let memtest run a few hours more and it detected another error. Looking to RMA this stick. Will test the other stick tonight. Link to comment Share on other sites More sharing options...
Fyzwick Posted November 19, 2005 Author Share Posted November 19, 2005 Ran the other stick overnight. Same DIMM slot, same BIOS RAM timings. 15 hours, no error. I believe only one stick is defective. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 22, 2005 Corsair Employees Share Posted November 22, 2005 Let's go ahead and get the kit replaced to be sure. Please see the link in my signature, "I think I have a bad part..." and we will be more than happy to replace this for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.