Bingoloft Posted November 18, 2005 Share Posted November 18, 2005 Hello! I'm from Germany so my English isn't so perfect. I hope you'll understand me :)! I've got a problem, my memory (Corsair TwinX XMS 3200XL) is bad. I never made overclocking with this memory or stuff like that. I tested it in all different variations with memtest and everytime there were a lot of error after 3%...! My Computer is always crashing when I try to use the Dual Channel mode...=( ! Can you help me? What can I do here from Germany to solve this problem? Thanks! Bye Bingo Link to comment Share on other sites More sharing options...
Wired Posted November 18, 2005 Share Posted November 18, 2005 Test one stick at a time in each slot using Memtest86+ and the following settings: CAS Latency: 2 RAS to CAS Delay (tRCD): 2 Row Precharge (tRP): 2 Active to Precharge Delay (tRAS): 5 Memory Voltage: 2.75 Volts All other settings to defaults. Link to comment Share on other sites More sharing options...
Bingoloft Posted November 18, 2005 Author Share Posted November 18, 2005 Thx for your answer! Well, I did that already. I tried every slot, one stick, both sticks, changed them, changed the voltage...I tried everything with professional help...but nothing changed the results of Memtest Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 18, 2005 Corsair Employees Share Posted November 18, 2005 Let's go ahead and replace these. Please see the link in my signature, "I think I have a bad part what can I do?" Link to comment Share on other sites More sharing options...
Bingoloft Posted November 18, 2005 Author Share Posted November 18, 2005 Ok, I tried it with the setting you told me and memtest86+ ...more than 4000errors and it hasnt completely finished. But just in DC mode...when I tried it in the normal mode, no errors were shown. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.