lo_rez Posted November 17, 2005 Share Posted November 17, 2005 Hello, I ran Memtest86+ against this DIMM and it failed consistently. Any other suggestions? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 17, 2005 Corsair Employees Share Posted November 17, 2005 Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
lo_rez Posted November 21, 2005 Author Share Posted November 21, 2005 Here are the system specs. This is a production server. MB: Supermicro P4SCE CPU: Intel P4 3.2Ghz 800FSB 478P 512K BIOS: Settings are at default HyperThreading: Enabled Processor not overclocked Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 21, 2005 Corsair Employees Share Posted November 21, 2005 Have you tried the module in another slot to be sure? Link to comment Share on other sites More sharing options...
lo_rez Posted November 21, 2005 Author Share Posted November 21, 2005 No I have not tried the module in a different slot. I did try a different module in the same slot and that worked. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 21, 2005 Corsair Employees Share Posted November 21, 2005 Please see the link in my signature "I think I have a bad part..." and we would be more than happy to replace the module set for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.