veilside Posted November 16, 2005 Share Posted November 16, 2005 Hello I am French, excuses me for my very bad English. My problem is, one of both module of my kit 2*256Mo XMS LL does not walk more, much of error under mentest+, and when the defective module is to install only, the PC boot more and of the beep sounds in alternation. Thank you Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 16, 2005 Corsair Employees Share Posted November 16, 2005 Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
veilside Posted January 17, 2006 Author Share Posted January 17, 2006 ok, I did what you said to me. I put the timing car and handbook to see whether its functioned, the tension 2.7 volt but nothing has to always do as much error on one of the barettes of the module 2*256Mo XMS LL. Thank you has you and has CORSAIR. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 17, 2006 Corsair Employees Share Posted January 17, 2006 Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.