Najmods Posted November 15, 2005 Share Posted November 15, 2005 I cant get this board to run at any divider exept 1:1 when overclocking above 250HTT.Everytime I change it right after POST I get the NV RAID detecting array error and the lowest divider I cant boot at ALL I tested with other RAM I got (Apacer 512MB DDR400) it works just fine.I get so frusterated,I have post this kind of thread at DFI street and their said the module have trouble with the mobo What should I do? I dont want to change RAM since it overclock very nicely 268MHz at 2.8V My RAM is 2x512MB Corsair XMS3200 TwinX 1024 Rev5.2 (Promos Rev A) 3,3,3,8 2.5V Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 15, 2005 Corsair Employees Share Posted November 15, 2005 Can you tell me our modules part# (How To Read the Memory Label) and the bios settings you are trying to set for both CPU and memory and any performance settings that you may have set? And or what settings are working for the other modules but not these and how amny modules do you have installed? Link to comment Share on other sites More sharing options...
Najmods Posted November 15, 2005 Author Share Posted November 15, 2005 My RAM PART NUMBER is CMX512-3200 VERSION NUMBER v5.2 LOT NUMBER is 0533010-2 And I installed 2 sticks of this RAM and also my other RAM (2x256MB)but all the dividers are working perfectly on this Apacer RAM and I can hit 350HTT with 133MHz(3:2) divider and 2.8V with 3,4,4,8 latency I want to set it to diffrent divider other than 200MHz(1:1) but its not working if my HTT is above 250.The other besides 1:1 divider works above 250HTT is 133MHz(3:2) but strangely it wont go above 286HTT.I set everything in the BIOS at stock timing (3,3,3,8) and 2.8V to VDIMM and even tried 2T Command Rate,relaxed timing (3,5,5,10) increase voltage to 3.2V but still the same.I still get the Detecting Array problem right after POST Please help me..... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 15, 2005 Corsair Employees Share Posted November 15, 2005 Can you please list what you have set for the following in your BIOS: CPU FSB Memory FSB Hyper Transport Multiplier Memory Timings Memory Voltage Also, please check the following link and if you have not already, upgrade to the latest BIOS available for your motherboard: http://www.dfi.com.tw/Support/Download/bios_download_us.jsp?PRODUCT_ID=3590&CATEGORY_TYPE=MB&STATUS_FLAG=A&SITE=US Also, can you tell me how many modules you are currently running? Link to comment Share on other sites More sharing options...
Najmods Posted November 15, 2005 Author Share Posted November 15, 2005 Can you please list what you have set for the following in your BIOS: CPU FSB Memory FSB Hyper Transport Multiplier Memory Timings Memory Voltage Also, please check the following link and if you have not already, upgrade to the latest BIOS available for your motherboard: http://www.dfi.com.tw/Support/Download/bios_download_us.jsp?PRODUCT_ID=3590&CATEGORY_TYPE=MB&STATUS_FLAG=A&SITE=US Also, can you tell me how many modules you are currently running? CPU FSB is 286HTT Memory speed is 133MHz(3:2) divider Hyper Transport multiplier is 3X (also tried 2X 4X and 1X but no effect) Memory timing 3,3,3,8 Memory voltage 2.8V The problem: I got detecting array right after POST I looked for BIOS update almost every day IF they ever read my e-mail regarding this problem I currently running 2 of these module because I bought it in twin matched pair Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 16, 2005 Corsair Employees Share Posted November 16, 2005 And you have two other 512 Meg modules that will run at these settings? Is that correct? Link to comment Share on other sites More sharing options...
Najmods Posted November 16, 2005 Author Share Posted November 16, 2005 And you have two other 512 Meg modules that will run at these settings? Is that correct? Yes thats correct.Not only that it also can run up to 350HTT wITHOUT TROUBLE Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 17, 2005 Corsair Employees Share Posted November 17, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.