Twinx1024-3200XL Question

[ranger_krvs]

HELLO

 

I trying run my 1gig of Twinx1024-3200XL @DDR430 (215MHz) and from what seen from googling getting it running at DDR430 @ 2,2,2,5 should be np now I when running Memtest86 v.1.40 this is what I get:

 

2,2,2,5 (1T) 2,8V and fails in first or second pass

 

2,2,2,5 (2T) 2,8V and fails in 5,6 pass

 

I now there's alot other memory setting then just the 2,2,2,5 and command rate

but where do I start loosening the timing?? but still maintain the 2,2,2,5 timing? Also anybody know what the "burst length" should be for this memory as of now its @ 4 beats and my options are 2,4,8 beats?

 

any suggestions?

 

check sig for specs

[CMC_SAVAGE]

I would try a BIOS update.

2-2-2-5 1T at 215MHz should'nt be a problem for this RAM.

2,2,2,5 (2T) 2,8V and fails in 5,6 pass

Failure in test 5 usually indicates a problem elsewhere, not the RAM.

[ranger_krvs]

I have the latest bios and I am trying 2,3,2,5 (1T) right now and it seems to work, now couldn't it be another setting that could be causing it? My CPU multiplier is @ 8 just so I know its not that and the LDT 3x just so I also know that it not that either. You know what the "burst length" should be for this memory as of now its @ 4 beats and my options are 2,4,8 beats?

[ranger_krvs]

Can someone tell what I need to adjust so the runs @ 430MHz 2,2,2,5 (1T) 2,8V

on a Abit AV8 (latest bios 2,4) 1gig Twinx512-3200XL and here's a Bios screenshot

 

Thanks in advance

[ranger_krvs]

I know there is somebody out that knows.