wtrman Posted November 12, 2005 Share Posted November 12, 2005 My computer won't post with both sticks of memory...CMX512-3200C2PT. If i remove one it posts. This one stick seems to be bad. Link to comment Share on other sites More sharing options...
Wired Posted November 12, 2005 Share Posted November 12, 2005 What's the version # of each stick? what speed are you running the memory at? What's the FSB? Link to comment Share on other sites More sharing options...
wtrman Posted November 12, 2005 Author Share Posted November 12, 2005 What's the version # of each stick? what speed are you running the memory at? What's the FSB? xms3202v1.1 stock speed no overclock. Link to comment Share on other sites More sharing options...
Wired Posted November 12, 2005 Share Posted November 12, 2005 Are they both v1.1? Is it a TwinX set? Is your FSB 333 or 400? Link to comment Share on other sites More sharing options...
wtrman Posted November 13, 2005 Author Share Posted November 13, 2005 Are they both v1.1? Is it a TwinX set? Is your FSB 333 or 400? Yes both v1.1 ...not a twin x set fsb 333. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 14, 2005 Corsair Employees Share Posted November 14, 2005 Please enter the bios setup and set the following settings manually after you load setup/optimized defaults: CPU Freq: 166 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.7 Volts Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 7T Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.