Jump to content
Corsair Community

Bad Corsair TWINX1024-3700PT COR RT


kenidas

Recommended Posts

Hey guys,

 

Defaults on BIOS, memtest86+ picks up more than 50000 errors on my RAM =/. I've been having some blue screens for a while; my roommate suggested testing the RAM. Haha, oops.

 

What other info do I have to provide to submit properly an RMA? (Do I need screen captures as I have seen in another like thread?)

 

- kenidas

Link to comment
Share on other sites

  • Corsair Employees

Please with just our XMS module installed and reset the bios with the Clear CMOS jumper and then enter the bios setup and set the following settings and work your way up from there:

CPU Freq: 166 MHz

System Performance: User Define

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

Memory Timings: Manual/User Define

SDRAM CAS Latency: 3T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 7T

You cannot run at DDR400 with a 166 FSB CPU. Please try these settings and then test the modules one at a time with http://www.memtest.org to be sure.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...