Jump to content
Corsair Community

RAM Problems


Recommended Posts

Good day!


I have a customer who purchased a rather nice system, and he has been having a bit of problems running his memory at the rated speeds of 2-3-3-6 1T. He was able to boot into Windows, but would get many 'Fatal Error' message boxes. He was, in turn, forced to slow his ram down to 3-3-6-8 for timings. Any help regarding this issue would be appreciated.


System Hardware:

AMD Athlon64 X2 4400+

ABIT Fatal1ty AN8-SLI

Corsair TwinX1024-3200C2

Western Digital 200GB SATA Hard Drive

LG DVD Burner


Thanks in advance!

Link to comment
Share on other sites

  • Corsair Employees

Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...