Jump to content
Corsair Community

cmx512-4400c25pt in av8


narrowboat

Recommended Posts

hi i have just brought some cmx512-4400c25pt as soon as it gets to windows opening screen it crashes have tried clearing cmos still the same i did have value select in a bundle i brought from overclockers uk installed ,thought it was time to upgrade to some faster ram for gaming:[pouts:
Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest bios and then load setup defaults and set the following settings and test the modules one at a time with http://www.memtest.org and let’s make sure one is not failing!

Dim Voltage 2.8 Volts

CAS Latency CL=2

Row Cycle Time tRC Bios Default

Row Refresh Cyc Time tRFC Bios Default

Ras# to CAS# delay tRCD 3

Row to Row delay Bios Default

Min Ras# Active Time tRAS 6

Row Precharge Time tRP 2

Write Recovery Time Bios Default

Write to Read delay Bios Default

Read to Write Delay Bios Default

Refresh Period tREF Bios Default

Enable 2T Timing Disabled

Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...