crism007 Posted November 7, 2005 Share Posted November 7, 2005 Will the 2 x 1GB 3500LLPro run on my Asus A8N-SLI Deluxe board run flawlessly? If yes... what would be the optimal timings? Or maybe would a 4 x 512 MB Kit be a better option? Any help appreciated! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 7, 2005 Corsair Employees Share Posted November 7, 2005 I would not suggest more than one set! And yes they should run great on that MB. But weather or not you will be able to over clock will depend on the CPU and PSU! Link to comment Share on other sites More sharing options...
fatray Posted November 27, 2005 Share Posted November 27, 2005 I have this setup and when setting memory in BIOS to 433, it still shows up as 400 on the boot screen. Going back to BIOS it is set back to 400, setting board on AUTO it comes up as 333 every time. And it always says SINGLE CHANNEL, shouldn't it say DUAL CHANNEL? I can not find a way to adjust the voltage to the memory either. This memory also has timing as 2-3-2-6-T1, When ever I change the default to T1 "default is 2T" the system will not load Windows. Ran Memtest for 2 hours with no errors. Link to comment Share on other sites More sharing options...
Wired Posted November 27, 2005 Share Posted November 27, 2005 I have this setup and when setting memory in BIOS to 433, it still shows up as 400 on the boot screen. Going back to BIOS it is set back to 400, setting board on AUTO it comes up as 333 every time. And it always says SINGLE CHANNEL, shouldn't it say DUAL CHANNEL? I can not find a way to adjust the voltage to the memory either. This memory also has timing as 2-3-2-6-T1, When ever I change the default to T1 "default is 2T" the system will not load Windows. Ran Memtest for 2 hours with no errors. How many sticks do you have total? As for the single / dual, your sticks are in the wrong slots. Link to comment Share on other sites More sharing options...
fatray Posted November 27, 2005 Share Posted November 27, 2005 Your right, just read the "how to install memory" in the manual. Have to install sticks in the same color slots, not just next to each other. 2 sticks! Link to comment Share on other sites More sharing options...
Wired Posted November 27, 2005 Share Posted November 27, 2005 That may fix the speed issue. Post back how it works out! Link to comment Share on other sites More sharing options...
fatray Posted November 27, 2005 Share Posted November 27, 2005 It now reports as Dual Channel and 128 bit (was 64bit before) and the 1T is now working. Now if I only new what it all ment :laughing: Thank you very much for that info. But it still wont register as 433, only 400. Link to comment Share on other sites More sharing options...
Wired Posted November 27, 2005 Share Posted November 27, 2005 64-bit = single channel 128-bit = dual channel Try setting the memory to 433 again, may have to lower the LDT multiplier to 4X. Link to comment Share on other sites More sharing options...
fatray Posted November 27, 2005 Share Posted November 27, 2005 Here are my options the 433 setting does not work when booting up. What is LDT? http://www.yourapainintheass.com/downloads/ddrbios.jpg What no images posting??? Link to comment Share on other sites More sharing options...
CMC_SAVAGE Posted November 28, 2005 Share Posted November 28, 2005 But it still wont register as 433, only 400. The RAM could be DDR500 but will only boot at DDR400. Unless you OC the RAM, it will by default only run as fast as the FSB of the CPU. If you OC the RAM, you would also need to OC the CPU for stability reasons. Link to comment Share on other sites More sharing options...
fatray Posted November 28, 2005 Share Posted November 28, 2005 The RAM could be DDR500 but will only boot at DDR400. Unless you OC the RAM, it will by default only run as fast as the FSB of the CPU. If you OC the RAM, you would also need to OC the CPU for stability reasons. That sounds like a good reason. Right now that neat program AiBooster has my AMD 4000+ stock 2400 running at 2590MHz, FSB @ 863.28 and CPU Utilization(???) @ 215.82 X 12.0. Will have to read on what this program can do, but for now I'm playing all my games with settings to max. I have to get my buddies that are playing Call fo Duty 2 on the Xbox 360 to see what it is supposed to look and sound like. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.