nelsongs Posted November 4, 2005 Share Posted November 4, 2005 Here's another setup. Asus P5N32 and TWIN2X 2048 6400. What will be the settings on the motherboard for these DRAM sticks? Any incompatibility issues? Link to comment Share on other sites More sharing options...
Wired Posted November 4, 2005 Share Posted November 4, 2005 Each pair is tested and packaged together using the following settings: AI Over Clock Tuner: Manual CPU External Frequency: Manually set to 200MHz DDR2 SDRAM Clock: Manually set to 800MHz PCI Express Freq: Auto PCI Freq: 33.33 Performance Mode: Standard DRAM Timing Selectable: Manual SDRAM CAS Latency: 5T SDRAM RAS to CAS Delay (tRCD): 5T SDRAM Row Precharge (tRP): 5T SDRAM Active to Precharge Delay (tRAS): 12T SDRAM Write Recovery Time: 5 DDR2 SDRAM Voltage: 1.9 Chipset Core Voltage: Auto All other settings are motherboard defaults. Maximum DDR2 recommended VDIMM: 2.1 Volts Also, what's the amps on your 12V lines on your PSU? Link to comment Share on other sites More sharing options...
CandyKid Posted November 4, 2005 Share Posted November 4, 2005 +12v1@13a, +12v2@18a, +12v3@16a, +12v4@8a Plur Ck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.