Jump to content
Corsair Community

Bad Ram


vance

Recommended Posts

I have two sets of TwinX1024-3200PT Ram in a Asus P4C800-e Deluxe mobo. When I used memtest-86 v3.2 and I get 903 errors. I have run the Windows Ram test as well and get lots of errors. I discovered the problem while trying to install a new program. My BIOS are current.

 

What are my options?

 

Could the settings be causing 903 errors?

 

Why are TwinX1024-3200PT not listed on the TSXpress tech support?:confused:

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...