Jump to content
Corsair Community

Bad ram - TwinX1024-3200C2


NascarFool

Recommended Posts

Today my comp started crashing and I figured it was the ram. I have memtest running and after 22 minutes it is showing 22 errors in test five and one error in test eight. Do iI send in both sticks for RMA or just one stick ? How do I get an RMA number for warranty ?

 

*Update*

I ran memtest on each stick and one stick showed no errors after one pass. The other stick shows 8,569 errors after on pass. Looks like one stick is toast.

Link to comment
Share on other sites

  • Corsair Employees

Test #5 generally signifies the problem is coming from elsewhere. It could potentially be your voltage settings.

 

Please try the following settings in your BIOS.

 

DRAM Voltage (also called DDR VOLTAGE): 2.75

--------------------

DRAM Clock: 200 MHz

SDRAM CAS Latency: 2

SDRAM RAS to CAS Delay (tRCD): 3

SDRAM Row Precharge (tRP): 3

SDRAM Active to Precharge Delay (tRAS): 6

All other settings are motherboard defaults.

 

Please let me know if you need further assistance.

Link to comment
Share on other sites

With the ram in another comp (Epox 8RDA3+) it is not dumping any errors after 16 minutes of memtest. I tried some HyperX modules in the MSI comp and it showed no errors. I'm only getting the errors from one of the sticks on the MSI board. I'll keep testing before I condem the ram.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...