MThead Posted October 30, 2005 Share Posted October 30, 2005 Hello Ram Guy, Been running the TWINX1024-3200C2PT in dual channel for almost a year now, started getting BSOD and ramdom lockups last month (XP pro). Tested both sticks with Prime95 and get failure in first minute, tried single stick at a time, one stick fails in 3 out of 4 slots within first minute.. Attach mini dumps from BSOD. System specs: P4 3.2 Pressy with X90 & 92mm Vantec Abit IC7G max II ATI 9800 Pro Antec Neo Power This should rule out heat and power.. Thanks, John Update: Ran Memtest86+ last night on the stick i suspect is going bad, failed on test#7, used Memtest when i built the system and ran it with both sticks for 50+ hours with no failures. Bios timmings are: Cas:3 Ras to Cas:3 Ras Pre:3 Act/Pre:8 voltage set to 2.75 Ram spec: CMX512-3200C2PT XMS3202v4.2 0438102-510-25-1.zip Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 31, 2005 Corsair Employees Share Posted October 31, 2005 Let's go ahead and get them replaced for you. Please follow the link in my signature "I think I have a bad part" and we would be more than happy to replace them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.