Jump to content
Corsair Community

Corsair TWINXP1024-3200XL 1GB Kit Failure, RMA?


JohnClifford

Recommended Posts

Hi,

 

In March 2005 I purchased some memory from ZipZoomFly:

 

Corsair TWINXP1024-3200XL 1GB Kit DDR400 XMS3200 Xpert Memory w/Black Heat Spreader Retail

 

Installed into Asus P4C800E-deluxe MB, Intel 3.4ghz skt478 CPU, ATI Radeon 9700.

 

I was very pleased with the memory until i started having problems with the O/S (XP). I started experiencing lockups, and BSOD's at random times. I swapped CPU, Video, no avail. I swapped the memory out with another PC in the rack and the computer runs stable. I put the memory into the other PC and that PC became unstable. I ran a memory test and after a moment, failures appear.

 

I hope you can provide me with an RMA#, sooner the better. I eagerly await your response.

 

Thanks in advance,

John Clifford.

Link to comment
Share on other sites

  • Corsair Employees

We have no problem replacing the modules for you but you should give the following a try first as it can solve many issues such as what you are describing:

 

Please make the following changes in your BIOS and let us know what happens afterwards.

 

Jumperfree Configuration

DRAM Voltage (also called DDR VOLTAGE): 2.75

DRAM Clock(frequency): 200 MHz

--------------------

Advanced Chipset Features

 

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 2T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 5T

SDRAM Bank Interleave: 4 Bank

All other settings are motherboard defaults.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...