hugovs Posted October 27, 2005 Share Posted October 27, 2005 i got problems with a 512 mo value select memory. test with memtest and got more then 160000 errors. my timings are set on by speed, and voltage is 2.7V. I swear that my computer doesn't reboot until i post my reply!!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 27, 2005 Corsair Employees Share Posted October 27, 2005 Please set these settings and test the modules one at a time with http://www.memtest.org to be sure CPU Freq: 133 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.7 Volts Resulting Frequency: 133MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 7T Link to comment Share on other sites More sharing options...
hugovs Posted October 27, 2005 Author Share Posted October 27, 2005 the settings you get me are exactly the same as i set in the bios. i also made a test with rightmark memory to be sure, and the programs tell me there are errors. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 27, 2005 Corsair Employees Share Posted October 27, 2005 What does memtest say the memory frequency is at? Link to comment Share on other sites More sharing options...
hugovs Posted October 27, 2005 Author Share Posted October 27, 2005 memtest displays 199 mhz (ddr 399). should i take a picture of my memtest screen? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 27, 2005 Corsair Employees Share Posted October 27, 2005 Then you did NOT set the settings as I posted them. And if you run the memory out of sync with your CPU that may be cauing the errors. Link to comment Share on other sites More sharing options...
hugovs Posted October 27, 2005 Author Share Posted October 27, 2005 ok. i set ram frequency to 133 mhz. result: 2 reboots, 1 windows register restauration and always errors in memtest. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 27, 2005 Corsair Employees Share Posted October 27, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.