The_Stig Posted October 25, 2005 Share Posted October 25, 2005 Have had a pair of CMX512-3200C2's running for ~8 months. Everything was great until attempting to restart this morning -- system would not even post. By pulling one stick I can boot but swapping the modules leaves the system hanging. Mobo - ASUS A8V Deluxe. Any suggestions? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 25, 2005 Corsair Employees Share Posted October 25, 2005 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.