Jump to content
Corsair Community

bad stick wont post.


mutantbigman

Recommended Posts

i purchased 2 x 3200xlpro sticks about 6 months ago to replace standard ram. I booted my system yesterday and it wouldn't post. I removed one stick and it booted fine, swapped sticks and again didn't boot. The mobo emits a beep at regular intervals. memory was working great and is compatible. The bios setting were set to auto before (machine automatically booted to 2,2,2,5) and even after setting these manually still no joy. Any thing else i should try? will i be able to get these replaced if nothing works?
Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.8 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...