Jump to content
Corsair Community

Possible bad RAM


Recommended Posts

I use the Windows Memory Diagnostic to test my 2 sticks of RAM. The stick are...


Part #VS1GB400C3

Speed: PC3200

Size: 1024mb

Org: 128Mx64

Package: 184 DIMM


Testing the first stick it came out fine. It passed all 6 tests without problems. My second stick failed every test pretty much in everyway. So I would like to replace it.

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...