orlando332 Posted October 22, 2005 Share Posted October 22, 2005 Hello, About two months ago I purchased two 512 corsair modules (VS512MB400) along with a new asus MB (A7V600-X) as soon as i installed everything it worked fine, however a week later i started getting random resets and blue screens. I assumed it was the MB and called Asus they replaced the MB and i still continued to get the resets to the point where now my system won't boot fully into windows withough getting a blue screen of some sort. I even went as far as replacing the power supply, that had no effect. I recently ran memtest86 and got over 1000 errors... i tried each module individually over the course of two days and got the same results for each, over a 1000 errors. The timings for the modules are set by SPD in the bios. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 24, 2005 Corsair Employees Share Posted October 24, 2005 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.