robertnguyen281 Posted October 22, 2005 Share Posted October 22, 2005 I just built a new computer with 2 XMS C2 PRO. I have been experiencing random restarts so I decided to test with Prime95. The test halts after a few seconds, so I thought that it was the RAM chips. I then tested the computer with each RAM chip separately and only one chip causes my computer to restart. If I RMA this, will I need to send both back or just the defective one? I went looking through the forum and noticed others with the Chaintech VNF4 Ultra motherboard also experience the same situation. It may just be coincidence or possibly a problem with the motherboard. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 24, 2005 Corsair Employees Share Posted October 24, 2005 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.