echow87 Posted October 22, 2005 Share Posted October 22, 2005 I think that both memory modules are not working. Tried it in a DFI nF3 UT 250gb, Abit NF7-S, and a DFI NF4 Ultra-D. Tried all the memory slots (using just one stick and testing every slot to see if it would boot or not). Nothing worked. I believe that the memory is "dead". Link to comment Share on other sites More sharing options...
Kharlkuhlinayn Posted October 22, 2005 Share Posted October 22, 2005 You are going to be directed by RamGuy to run MemTest on the sticks so you might want to do that ahead of time. Go to http://www.memtest86.com and follow the instructions and report any problems. Most likely you get suggestions for the timings and voltages but knowing the results of a few passes of MemTest helps narrow things down. If MemTest comes back with no problems then there is likely other issues. Link to comment Share on other sites More sharing options...
echow87 Posted October 23, 2005 Author Share Posted October 23, 2005 Like I said, I cannot get the computer to boot using this set of memory, therefore I cannot run memtest or anything. There is no video on monitor. I tried a set of Corsair TwinX PC3200LL and it works flawlessly so its not a computer issue. I am 100% postive the modules are dead since it cannot boot in either of the three test setups. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 24, 2005 Corsair Employees Share Posted October 24, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.