Jump to content
Corsair Community

Pretty sure it's bad


justrick

Recommended Posts

I have a CMX512-3200C2 module that appears to be bad. In two different machines it caused random reboots; both worked fine once I swapped in a different module. Other numbers on the module:

 

XMS3202v4.2

0522031-7

XMS3200 512MB 400MHz CL2

 

Can I get it replaced?

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...