Jump to content
Corsair Community

Corsair XMS-4400 512 C25PT x2


gengstapo2

Recommended Posts

  • Corsair Employees

Please make sure you have the latest -3 BIOS installed for your MB (download the Beta version) and load optimized defaults settings, and try the following BIOS settings;

 

Genie BIOS/DRAM Configuration

DRAM Frequency Set: 2:1 or 400MHz or 200 (if option are 133/166/200)

Command per Clock: Enabled

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 2T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 5T

And leave the rest at AUTO setting

Genie BIOS

FSB BUS Frequency: 200

LDT/FSB Frequency ratio: 5X

LDT Bus Transfer Width: 16 16

CPU/FSB Frequency ratio: Auto

PCI Ex: 100

K8 cool N’ quiet: Disable

CPU VID Start Up Value: 1.55

CPU VID Control: 1.55

CPU VID Special Control: Auto

Chipset Voltage Control: 1.6

DRAM Voltage Control: 2.8

All other settings are motherboards defaults

Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...