Jump to content
Corsair Community

New Ram Pc Wont Boot Up


Recommended Posts

Hey have a ASUS p4p800 MB P4 2.26 533 previoulsy had a single 512 pc2700 stick of ram in it.....just purchased 4 of these CORSAIR ValueSelect 512MB 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) System Memory - Retail

Model #: VS512MB400 now it wont boot up???? even tried removing all but 1 stick and it started to boot up and went to a black screen....re installed old pc 2700 512 stick and its ok now.....any help very much appreciated....Frank

Link to comment
Share on other sites

  • Corsair Employees

Please try these settings after you load setup defaults.

AI Over Clock Tuner: Manual

CPU Freq: 133 MHz

Memory Frequency: DDR333

Dim Voltage to 2.75 Volts (if you have problems try 2.85 Volts)

Resulting Frequency: 166Mhz/DDR333

Legacy USB: Disabled

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 7T

Then test the modules with http://www.memtest.org, if you have or get errors please test them one at a time.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...