Jump to content
Corsair Community

Bad CMX512-3200C2PT


r0rschach

Recommended Posts

CMX512-3200C2PT

 

XMS3202v4.2

 

0520114-0

 

I have two sticks, my computer has had issues with lockups, random resets, etc since I built it. Finally yesterday it started locking up at the bios screen. I discovered it will run fine with one stick taken out. If I put the other stick in by itself or use both, it locks up. So it is definitely the one specific stick of ram that is the problem.

Link to comment
Share on other sites

  • Corsair Employees
Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set?
Link to comment
Share on other sites

I have a Chaintech VNF4 Ultra with an AMD64-3000. I'm not sure I could find the FSB setting, it says "CPU Frequency" is 200, "PCIE Clock" 100. I reset the bios and flashed it when i was having problems, so everything was on factory defaults. Today I set the memory to the timings found in the link from your signature. I also tried putting the bad module back in the pc, but now I just get a single long error beep and no video.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...