Jump to content
Corsair Community

Info new Ram TWINX2048-3500LLPRO 2x1GB


RickyItaly

Recommended Posts

1) What chip does it has?

2) Does it work at 2-2-2-6 or 2-3-2-5 at default (DDR400) with a motherboard DFI Lanparty UT NF4 Ultra-D?

3) What’s the tension used at 217 2-3-2-6?

 

Please don't bump within 24 hours. Your first post was @ 11:21 PM PST where Ram Guy is located, and your 2nd was @ 5:01 AM PST. Pretty sure they weren't in the office :)

 

1)

We use Infneon -5 64M X 8 Rev B that we screened.

2) 2-3-2-6 are the rated timings.

 

3) Tension???

Link to comment
Share on other sites

Please don't bump within 24 hours. Your first post was @ 11:21 PM PST where Ram Guy is located, and your 2nd was @ 5:01 AM PST. Pretty sure they weren't in the office :)

 

Yes, sorry... i didn't think you are in the U.S.

Corsair sounds like a european brand... ;):

Link to comment
Share on other sites

Who told you that? Please provide a link!

They said using a DFI Lanparty UT NF4 Ultra-D or SLi with a big cpu cooler like a Zalman CNPS7000B-CU.

These memories are taller than many other ram (for example G.Skill i have now):

 

 

http://www.corsair.com/corsair/products/specs/TWINX2048-3500LLPRO.pdf

 

 

What about the preferite slots in the DFI motherboard: Yellow or Orange?

 

(G.Skill prefer the orange one like the old Corsair with the TCCD. Corsair with Winbond chip the yellow one)

Link to comment
Share on other sites

Ram Guy,

what you think about this review with the DFI motherboard and this Corsair with chip Infineon?

 

http://www.thinkcomputers.org/beta/home.php?x=reviews&id=258&page=3

 

Like you can see it works in the yellow slots

 

http://www.thinkcomputers.org/reviews/corsair_xms-3500LL_pro/tn_corsair%20(10).JPG

 

but the author says:

 

" I finally got around to installing my water cooling system, I had a Zalman CPU cooler in there and the 2 sticks of GEIL memory just barely fit, this Corsair would most likely not fit with that cooler in there without moving to the next set of ram slots. Anyway, that's just a side note to think about. Here it is installed and working."

 

 

 

It's not clear if the tests and the results are done using the ram in the yellow one... :sigh!:

 

I can't use the orange slots because i have the Zalman CNPS7000CU-Led and i haven't enough space.

In the pics you can see the G.Skill 4400LE. The Corsair are two times taller...:

 

http://img412.imageshack.us/img412/6327/19bx.jpg

 

http://img412.imageshack.us/img412/3276/24yv.jpg

 

 

http://img412.imageshack.us/img412/7468/31ge.jpg

 

 

Which slots did you use in your tests with the DFI?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...