Jump to content
Corsair Community

Please Guy, a question.....


kiko

Recommended Posts

Are this 3 modules below matched ?

 

CMX1024-3200C2PT XMS3202v1.2 0531114-2 = INFINEON, Die Rev B (2-3-3-6)

CMX1024-3200C2PT XMS3202 V1.2 0524133-4 = INFINEON, Die Rev A 64M X 8 (2-3-3-6)

CMX1024-3200C2 XMS3202V1.2 0528082-2 = INFINEON, Die Rev A 64M X 8 (2-3-3-6)

 

and why if yes or no?

 

Thank you .

Link to comment
Share on other sites

No, they are not.

 

To be 'matched', I.E. a TwinX set, the modules would have to be tested as a pair by Corsair and pass their dual-channel qualifications.

 

These, as far as I can tell, are three individual modules. Also, different models are never put into TwinX packs because, well, they're different!

 

It does not mean the modules will not work together (albeit three might cause problems where two would not), but you'll probably have to relax the latencies from spec and increase the DDR voltage.

 

PLUR

CK

Link to comment
Share on other sites

Ok! I understood but this 2 below can to work in dual channels?

 

CMX1024-3200C2 XMS3202 V1.2 0524133-4 = INFINEON, Die Rev A 64M X 8 (2-3-3-6)

CMX1024-3200C2 XMS3202V1.2 0528082-2 = INFINEON, Die Rev A 64M X 8 (2-3-3-6)

 

You can to see that both are same name and ICs but bought in diferent time!!! Is possible them to work fine togheter in dual?

 

Thxs

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...