Jump to content
Corsair Community

Freezing with my current memory TwinX1024-3200XL 2-2-2-5


Uber_Nerd

Recommended Posts

Hello,

 

I have recently put in new v1.2 TwinX1024-3200XL 2-2-2-5 memory in my intel system. I am getting random freezing and resetting now. Before with the other 512 mb corsair I had no issues. I am running this new memory in dual channel mode and tried both the tight settings and lossened them as well. I do not know if it is the memory voltage that is causing the problem since I do not know how to change it in the D875bpz motherboard.

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.8 volts and then set the timings manually to the tested settings for the specific module you have (Cass 2-3-2-6 with the Rass to Cass set to "3"), and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...