Jump to content
Corsair Community

TWINX1024-3200XL Problem


Grim_sparticus

Recommended Posts

I have TWINX1024-3200XL currently running in single channel mode on my LP UT NF4 SLI-DR mobo. When I place the sticks in dual channel mode windows ceases to work just before the login screen and after the boot screen. I have run memtest86+ and there didn't appear to be any problems.

Also the Nvidia tool nTune records my memory speeds as DDR333.

Please help :confused:

Thankyou

Link to comment
Share on other sites

  • Corsair Employees

The modules you have are compatible with this motherboard. Please make sure the motherboard BIOS is up to date and try the following settings. You can set them in your BIOS, if you have trouble locating one of the settings consult your manual or please contact the support team of your motherboard manufacturer.

Load setup/optimized defaults and se these settings.

DRAM Voltage (also called DDR VOLTAGE): 2.8

--------------------

DRAM Clock: 200 MHz/DDR400

SDRAM CAS Latency: 2

SDRAM RAS to CAS Delay (tRCD): 2

SDRAM Row Precharge (tRP): 2

SDRAM Active to Precharge Delay (tRAS): 5

All other settings are motherboard defaults.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...