Jump to content
Corsair Community

ASUS K8N-E Deluxe & VS1GBKIT400


Johnnie_cache64

Recommended Posts

OK, building system just like know if the Corsair Value Select PC3200 DDR400 Kit 2x512MB 184-pin DIMM (VS1GBKIT400) would be compatibile. I seen you suggest it several times. Is there any addition information I should know when install these ??. I would go for single stick but unforntly my budget will not allow this.
Link to comment
Share on other sites

  • Corsair Employees

The timings for these modules should be detected automatically. but if you wish to set them manually please use the following:

 

DRAM Voltage (also called DDR VOLTAGE): 2.75

--------------------

DRAM Clock: 200 MHz

SDRAM CAS Latency: 2.5

SDRAM RAS to CAS Delay (tRCD): 3

SDRAM Row Precharge (tRP): 3

SDRAM Active to Precharge Delay (tRAS): 8

All other settings are motherboard defaults.

 

Let us know if oyu have any more questions! :):

Link to comment
Share on other sites

Once again, Thank you for the reply but I have yet another question. I was not aware you made Value Select 2GB kit (VS2GBKIT400C3). I do not see this on the compatiblity list for my Asus K8N-E Deluxe, would this Kit work with my motherboard ? As I do prefer set the timing values manually on my motherboard would the settings be for VS2GBKIT400C3 ? :):
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...